Meltblown PP Cartridges
PP fibers thermally bonded -- no adhesives. 3D random fiber structure with gradient density. High dirt-holding capacity. Can absorb oil from water. Ratings 1-100 μm.
Meltblown PP Cartridges
JINLV meltblown PP cartridges are formed by thermally bonding polypropylene fibers without any chemical binders. The resulting 3D random fiber structure has a gradient density -- coarser fibers on the outside, finer fibers near the core -- that progressively captures particles of decreasing size. This gradient structure maximizes dirt-holding capacity and extends service intervals compared to uniform-density media. The strong hydrophilicity of the PP fiber allows these cartridges to absorb oil from water streams, making them suitable for oil/water separation pre-treatment. Available in 10 in and 20 in lengths with DOE, 222, and 226 connections.
Standard Parameters
Swipe horizontally to read the full specification table.
| Parameter | Value / Range |
|---|---|
| Filter Media | Melt-blown PP |
| Center Core & End Caps | PP |
| Gasket / Sealing Ring | Silicone / Buna-N / Viton / EPDM / PE |
| Filtration Ratings | 1, 5, 10, 20, 50, 100 μm |
| Lengths | 10 inch (250 mm) / 20 inch (500 mm) |
| Connections | DOE / 222 / 226 |
| Max Operating Temperature | 60°C |
| Max Operating Pressure | 3 bar |
- Pharmaceutical process water pre-filtration
- Food and beverage ingredient pre-filtration
- Fine chemical liquid pre-filtration
- RO system pre-filtration
- Industrial cooling water pre-filtration
- Oil/water separation pre-treatment
Send your housing model, flow rate, operating temperature and medium for a compatibility review and any remaining information requirements.
Get a Quote livia@shpjgl.com