RESOURCES
Product Selection Guide
Match your process conditions to the correct JINLV filtration product line.
Step 1: Define Your Media
Identify the fluid type: aqueous, solvent-based, oil, gas, or slurry. This determines material compatibility.
Step 2: Set Your Micron Rating
Nominal vs. absolute ratings matter. For critical applications, specify absolute-rated elements.
Step 3: Match Flow Rate
Standard 10-inch cartridges handle 1–5 m³/h. High-flow series reduce housing count.
Step 4: Check Temperature & Pressure
Ensure your housing pressure rating matches the element rating and process conditions.
Quick Reference: Product vs. Application
| Application | Recommended Product | Micron Range | Max Temp |
|---|---|---|---|
| General liquid filtration | PP/PE Filter Bags | 0.5–600 μm | 90°C / 150°C |
| Aggressive chemical media | PTFE Filter Bag / Cartridge | 0.1–10 μm | 300°C / 200°C* |
| High-volume water treatment | JC High-Flow Series | 1–50 μm | 80°C |
| Pharmaceutical / biotech | PES / Nylon Membrane | 0.1–0.45 μm | 80–120°C |
| High-temp metal filtration | Sintered SS / Ti Rod | 1–100 μm | Up to 300°C* |