Glass Fiber Membrane Cartridge
Imported glass fiber membrane with PP long-fiber nonwoven support. High dirt-holding capacity. For high-viscosity liquids, pre-filtration of colloids, and high-temperature streams.
Glass Fiber Membrane Cartridge
JINLV glass fiber pleated membrane cartridges use imported glass fiber membrane supported by PP long-fiber nonwoven fabric. Glass fiber media provides significantly higher dirt-holding capacity than polymer membranes for the same nominal rating, making these cartridges ideal for heavily loaded or high-viscosity streams where polymer cartridges would blind prematurely. The reinforced stainless steel inner lining option allows operation at temperatures up to 120°C. Suitable for pharmaceutical and chemical pre-filtration, colloid-containing streams, and high-temperature process liquids.
Standard Parameters
Swipe horizontally to read the full specification table.
| Parameter | Value / Range |
|---|---|
| Filter Membrane | Glass fiber membrane |
| Flow Distribution Layer | Imported PP long-fiber nonwoven |
| Skeleton / End Cap | Reinforced PP |
| Center Core | Reinforced PP (standard) or SS (high-temp) |
| Ratings | 0.2, 0.45, 1.0, 3.0, 5.0 μm |
| Lengths | 10 / 20 / 30 / 40 inch |
| Connections | 222 / 226 / 220 / DOE |
| Max Temp | 80°C (PP) / 120°C (SS inner lining) |
| Sealing | Silicone / EPDM / fluororubber / PTFE |
- High-viscosity liquid pre-filtration
- Colloid-containing stream pre-filtration
- Pharmaceutical pre-filtration
- Petrochemical pre-filtration
- High-temperature liquid filtration
Send your housing model, flow rate, operating temperature and medium for a compatibility review and any remaining information requirements.
Get a Quote livia@shpjgl.com