PTFE Hydrophobic Membrane Cartridge
For gas sterilization, vent filtration, and non-aqueous solvents. Repels water; passes air and organic vapors freely. Ratings 0.1-1.0 μm.
PTFE Hydrophobic Membrane Cartridge
JINLV PTFE hydrophobic pleated membrane cartridges are the standard choice for gas and air sterilization filtration, tank vent filtration, and non-aqueous solvent filtration. The naturally hydrophobic PTFE membrane repels water while allowing air, gases, and organic vapors to pass freely. The pleated construction maximizes filtration area in a compact footprint. All cartridges are hot-melt welded with no adhesives and are integrity-testable by bubble point method. Available in standard 10 in, 20 in, 30 in, and 40 in lengths with 222, 226, and DOE connections.
Standard Parameters
Swipe horizontally to read the full specification table.
| Parameter | Value / Range |
|---|---|
| Filter Membrane | PTFE (hydrophobic) |
| Flow Distribution Layer | PP long-fiber nonwoven |
| Skeleton / End Cap | Reinforced PP |
| Ratings | 0.1, 0.2, 0.45, 1.0 μm |
| Lengths | 10 / 20 / 30 / 40 inch |
| Connections | 222 / 226 / 220 / DOE |
| Max Temp | 80°C continuous |
| Integrity Test | Bubble point |
- Gas and air sterilization filtration
- Tank vent filtration
- Solvent filtration
- Non-aqueous liquid filtration
- Chemical process gas filtration
Send your housing model, flow rate, operating temperature and medium for a compatibility review and any remaining information requirements.
Get a Quote livia@shpjgl.com