JC-PPPA High Flow Cartridge
OD 152 mm. Alternative end cap and handle geometry. Same media and performance as JC-PPPK. For housings with different locking mechanisms.
JC-PPPA High Flow Cartridge
The JC-PPPA series shares the same 152 mm outer diameter, media options, and performance envelope as the JC-PPPK, but uses an alternative end cap and handle geometry designed for housings with different locking mechanisms. This allows customers with existing high flow housings from various manufacturers to source compatible replacement cartridges from JINLV. All JC-PPPA cartridges use hot-melt welding technology with no chemical adhesives.
JC High-Flow Series Visualizer
Switch models to compare diameter, interface geometry, and the typical flow path. Animation explains the working principle and is not to scale.
JC-PPPA Series
Alternative end-cap and handle geometry
- OUTER DIAMETER
- 152 mm
- LENGTHS
- 20 / 40 / 60 inch
- MICRON RATINGS
- 1–100 μm
- MAX. TEMPERATURE
- 80°C
- MAX. DIFFERENTIAL
- 3.4 bar @ 23°C
- INTERFACE
- A-type interface
Standard Parameters
Swipe horizontally to read the full specification table.
| Parameter | Value / Range |
|---|---|
| OD | 152 mm |
| Lengths | 20 / 40 / 60 inch |
| Filtration Ratings | 1, 3, 5, 10, 20, 50, 100 μm |
| Filter Media | Imported PET long-fiber nonwoven / melt-blown PP / glass fiber |
| End Cap | PP / glass fiber reinforced PP (alternative geometry) |
| Sealing | Silicone / EPDM / fluororubber / PTFE / nitrile |
| Max Operating Temp | 80°C |
| Max Differential Pressure | 3.4 bar at 23°C |
- RO pre-treatment security filtration
- Industrial process water filtration
- Chemical process filtration
- Large-volume industrial liquid filtration
Send your housing model, flow rate, operating temperature and medium for a compatibility review and any remaining information requirements.
Get a Quote livia@shpjgl.com