JINLV
Filtration Consumables
JINLV Filtration
JINLV
Filtration Consumables
HomeProductsHigh Flow Filter CartridgesJC-PPPK High Flow Cartridge
High Flow Filter Cartridges

JC-PPPK High Flow Cartridge

OD 152 mm. Ergonomic handle for single-person replacement. PET long-fiber or melt-blown PP media. Ratings 1-100 μm. Lengths: 20 / 40 / 60 inch.

Request a Quote Spec Sheet
Hot-melt welded -- no chemical adhesives
Ratings: 1, 3, 5, 10, 20, 50, 100 μm
Max operating temp: 80°C
Max differential pressure: 3.4 bar at 23°C
OEM equivalent dimensions available
Custom end cap configurations on request
Product Overview

JC-PPPK High Flow Cartridge

The JC-PPPK is JINLV's flagship high flow cartridge series. The 152 mm outer diameter and ergonomic handle design allow single-person replacement without special tools, reducing maintenance time in large industrial systems. Inside-out flow direction. Filter media options include imported PET long-fiber nonwoven, melt-blown ultra-fine PP, and glass fiber filter paper. Hot-melt welding technology -- no chemical adhesives. A single 60 in JC-PPPK cartridge delivers up to 6 m2 of filtration surface area and handles flow rates up to 40 m³/h.

Product Images
JC-PPPK High Flow Cartridge 1
JC-PPPK High Flow Cartridge 2
JC-PPPK High Flow Cartridge 3
JC-PPPK High Flow Cartridge 4
JC-PPPK High Flow Cartridge 5
JC-PPPK High Flow Cartridge 6
JC-PPPK High Flow Cartridge 7
INTERACTIVE STRUCTURE SCHEMATIC

JC High-Flow Series Visualizer

Switch models to compare diameter, interface geometry, and the typical flow path. Animation explains the working principle and is not to scale.

SCHEMATIC · NOT TO SCALE
TYPICAL FLOWOutside → In
PPPK

JC-PPPK Series

Standard end-cap with ergonomic handle

OUTER DIAMETER
152 mm
LENGTHS
20 / 40 / 60 inch
MICRON RATINGS
1–100 μm
MAX. TEMPERATURE
80°C
MAX. DIFFERENTIAL
3.4 bar @ 23°C
INTERFACE
K-type interface
Final flow direction and sealing arrangement must be confirmed against the housing and end-cap configuration.
MODEL IDENTIFICATION GUIDE
Not sure whether it is PPPA, PPPK, or PPPM? Compare all three structures.
Specifications

Standard Parameters

Swipe horizontally to read the full specification table.

ParameterValue / Range
OD152 mm
Lengths20 inch (508 mm) / 40 inch (1016 mm) / 60 inch (1524 mm)
Filtration Ratings1, 3, 5, 10, 20, 50, 100 μm
Filter MediaImported PET long-fiber nonwoven / melt-blown PP / glass fiber
Support LayerPP / PET long-fiber / Nylon
SkeletonPolypropylene (PP)
End CapPP / glass fiber reinforced PP
SealingSilicone / EPDM / fluororubber / PTFE / nitrile
Max Operating Temp80°C
Max Differential Pressure3.4 bar at 23°C
Max Flow Rate (single element)Up to 40 m³/h (60 in)
Typical Applications
  • RO pre-treatment security filtration
  • Acid / alkali / organic solvent filtration
  • Semiconductor ultrapure water
  • Mineral water / beverage / juice production
  • Oilfield injection water
  • Municipal water pre-treatment
Industry Solutions
Need a custom spec?

Send your housing model, flow rate, operating temperature and medium for a compatibility review and any remaining information requirements.

Get a Quote livia@shpjgl.com
Chat on WhatsApp