JC-PPPM High Flow Cartridge
OD 160 mm. Modified connection interface. Higher dirt-holding capacity per element due to increased diameter. Ratings 1-100 μm.
JC-PPPM High Flow Cartridge
The JC-PPPM series uses a 160 mm outer diameter -- slightly larger than the JC-PPPK/PPPA -- with a modified connection interface. The increased diameter provides higher dirt-holding capacity per element, extending service intervals in heavily loaded applications. Available in 20 in, 40 in, and 60 in lengths with filtration ratings from 1 to 100 μm. Hot-melt welded construction with no chemical adhesives.
JC High-Flow Series Visualizer
Switch models to compare diameter, interface geometry, and the typical flow path. Animation explains the working principle and is not to scale.
JC-PPPM Series
Larger diameter and modified connection
- OUTER DIAMETER
- 160 mm
- LENGTHS
- 20 / 40 / 60 inch
- MICRON RATINGS
- 1–100 μm
- MAX. TEMPERATURE
- 80°C
- MAX. DIFFERENTIAL
- 3.4 bar @ 23°C
- INTERFACE
- M-type interface
Standard Parameters
Swipe horizontally to read the full specification table.
| Parameter | Value / Range |
|---|---|
| OD | 160 mm |
| Lengths | 20 / 40 / 60 inch |
| Filtration Ratings | 1, 3, 5, 10, 20, 50, 100 μm |
| Filter Media | Imported PET long-fiber nonwoven / melt-blown PP / glass fiber |
| Sealing | Silicone / EPDM / fluororubber / PTFE / nitrile |
| Max Operating Temp | 80°C |
| Max Differential Pressure | 3.4 bar at 23°C |
- High-load industrial liquid filtration
- RO pre-treatment
- Chemical process filtration
- Municipal water pre-treatment
Send your housing model, flow rate, operating temperature and medium for a compatibility review and any remaining information requirements.
Get a Quote livia@shpjgl.com